Pentium 4（简称奔4或P4）是英特尔公司于 2000 年 11 月发布的第 7 代 x86 微处理器。并且是继 1995 年出品的 Pentium Pro 之后的第一款重新设计的处理器，这一新的架构称做NetBurst。首款产品代码为 Willamette，拥有 1.4GHz 左右的内核时钟，并使用 Socket 423 脚位架构，首款处理器于 2000 年 11 月发布。不同于 Pentium II、Pentium III 和各种 Celeron 处理器，因为是全新设计的产品，所以与 Pentium Pro 的关联很小。值得注意的是，Pentium 4 有着非常快速到 400 MHz 的前端总线，之后更有提升到 533 MHz、800 MHz。它其实是一个为 100 MHz 的四条并列总线(100MHz x4 并列)，因此理论上它可以传送比一般总线多四倍的容量，所以号称有 400 MHz 的速度。AMD Athlon 的前端总线则有 266 MHz 的速度(133 MHz 双倍并列总线)。
关于 Intel Pentium 4
2000 年 6 月，英特尔发布了迄今为止最新和最强大的处理器。这些基于全新开发的英特尔“NetBurst”微架构。新一代处理器最初使用其 4200 万个晶体管处理数据，除了之前使用的 MMX 和 SSE 命令外，还有 144 个新的 SSE2 命令，并使用四倍并发总线接口交换数据。
新的 NetBurst 微架构中实现了以下功能：
超流水线技术：流水线深度是 PIII 的两倍，达到 20 级，在被核心微架构取代之前甚至扩展到 31 级。与 P6 之前的微架构相比，这种相对较长的流水线能够实现更高的时钟速率。
快速执行引擎：处理器的算术逻辑单元以处理器内核的两倍频率运行。这将在半条内执行某些命令。这会在执行命令时显着提高数据吞吐量并减少等待时间
高性能、四倍并发总线接口：拆分事务深度流水线总线可以同时处理多个请求，而无需在处理器端等待时间
高级执行跟踪缓存：是一种高级 L1 指令缓存，用于缓存解密的指令。该技术可实现显着更高性能的指令缓存和更有效地使用缓存内存
超线程技术：超线程以两种方式为用户提供增强的性能。通过使用“多线程”软件或在多任务环境中使用软件，例如 Linux 或 Windows XP。当软件被编写为由多个线程（程序部分）组成时，采用 HT 技术的 P4 处理器提供两个逻辑处理器。然后同时处理两个线程。
Introduction
Intel Pentium 4 is a family of high-performance microprocessors that succeeded Pentium III family. Pentium 4 CPUs are based on new NetBurst micro-architecture, which differed significantly from P6 micro-architecture used in Pentium II/Pentium III microprocessors. As an overall CPU performance is proportional to its frequency and its efficiency, to achieve better performance levels many micro-architectures, including P6, strike a delicate balance between faster CPU frequencies and improved efficiency. The NetBurst microarchitecture used different approach - it attempted to improve performance primarily by increasing CPU frequency, often at at the expense of efficiency. One of key elements in this approach was “Hyper-Pipelined Technology” - 20-stage pipeline (not counting decoder stages), that was significantly longer than in previous generation of Pentium processors. While longer pipelines are less efficient than shorter ones, they allow CPU core to reach higher frequencies, and thus increase CPU performance. To improve efficiency of very deep pipeline the Pentium 4 processors included new features: Trace Execution Cache, Enhanced Branch prediction, and Quad Data Rate bus. Intel Pentium 4 CPUs also included 144 new SIMD instructions called SSE2. Because the first generation of Pentium 4 processors, based on Willamette core, proved to be performing not significantly faster, and sometimes slower than the fastest Pentium III microprocessors, Intel added more efficiency improvements to subsequent Pentium 4 core generations - larger size of level 2 cache, faster FSB frequency, SSE3 instruction set, and Hyper-Threading technology. Other features, that were eventually added to the family, are 64-bit instruction set, and Virtualization technology.
First Pentium 4 microprocessors, based on Willamette and Northwood cores, as well as some Prescott processors, were referenced by their speed. To differentiate between Pentium 4 CPUs running at the same frequency, but having different features, Intel used one letter suffix, appended to CPU frequency:
A - Northwood microprocessors with 512 KB L2 cache (for frequencies 2 GHz and lower), or Prescott CPUs with 1 MB L2 cache (for frequencies higher than 2 GHz).
B - processors with 533 MHz FSB frequency.
C - processors featuring Hyper-Threading technology and 800 MHz FSB.
E - Prescott CPUs with 1 MB L2 cache.
Later generations of Pentium 4 CPUs, starting from Prescott core, were assigned processor numbers that uniquely identified processor frequency and features. Please see Intel desktop processor numbers page for more information.
“Pentium 4” brand was used only for high-performance single-core desktop and mobile microprocessors. Server-class CPUs, that were built on NetBurst microarchitecture, were branded Xeon and Xeon MP. Low-cost NeBurst microprocessors were manufactured under “Celeron” brand. Dual-core NetBurst-based microprocessors were branded Pentium D.
All Pentium 4s were manufactured in three types of packages - 423-pin PGA package for socket 423 motherboards, 478-pin micro-PGA package that worked in socket 478 motherboards, and pin-less 775-land LGA package that required socket 775 motherboards. Socket 478 package was used by both desktop and mobile microprocessors, while two other packages were designed for desktop systems only.
我的收藏
Intel Pentium 4 1.5GHz/256/400/1.75V
参数
数值
CPU 类型
423-Pin OLGA
核心
Willamette
Socket
423
主频
1500 MHz
外频
100 MHz
总线频率
400 MHz
倍频
x 15
一级缓存
8 KB
二级缓存
256 KB
晶体管
42,000,000
制造工艺
0.18 µm
电压
1.75 V
步进
SL4WT
生产日期
16/2001
Intel Pentium 4 1.7GHz/256/400/1.75V
参数
数值
CPU 类型
478-Pin FCPGA2
核心
Willamette
Socket
478
主频
1700 MHz
外频
100 MHz
总线频率
400 MHz
倍频
x 17
一级缓存
8 KB
二级缓存
256 KB
晶体管
42,000,000
制造工艺
0.18 µm
电压
1.75 V
步进
SL5TK
生产日期
20/2002
Intel Pentium 4 2.4GHz/512/533
参数
数值
CPU 类型
478-Pin FCPGA2
核心
Northwood
Socket
478
主频
2400 MHz
外频
100 MHz
总线频率
400 MHz
倍频
x 24
一级缓存
8 KB
二级缓存
512 KB
晶体管
55,000,000
制造工艺
0.13 µm
电压
1.75 V
步进
SL6RZ
生产日期
17/2003
Tags:
Intel
Pentium